Vinyl Craft Resources and Tutorials

As you keep improving your craft skills, you’ll notice that the craft vinyl rolls keep stacking up, creating chaos in your workspace. To be honest it gets really tricky to keep a space organized when materials and rolls seem to be exploring from drawers, baskets and desk surfaces. Eventually, you will get to a point where a vinyl rack holder becomes crucial. My space got so bad that I didn’t even know which of my vinyl were HTV and which were adhesive!! EEEK! 

I’m sure if you are here, you are just as desperate as I was to find a way to keep things more organized in order to have a neater working space. This article will review some of the best vinyl roll storage racks, holders, and storage options of 2020. It will also explain what you should look for in a standard vinyl roll holder, as well as look as how much space each will take up. 

If you are a rush, these are the wall mount vinyl holder rack that we highly recommend!

Here are some questions you might want to answer in your mind, before you proceed – otherwise you might go down the rabbit hole of option overload, which will cause confusion and we don’t want that! So answer these and keep these in mind when you browse through our recommendations:

1. How much space do you have in your craft room/or craft corner?
2. Would it be best to have the solution sit on the wall or do you prefer do you have enough space for it to occupy some floor space?
3. How many rolls do you estimate you actually have? 

Now, let’s find the best solution for your circumstances.

Buyers Guide for the Best Vinyl Roll Storage Racks and Holders

Here are some guidelines for you to help you figure out which storage option is the best option for your craft room. These are all ready-to-purchase options. But of course you also have the option of grabbing a DIY vinyl roll holder tutorial and building one from scratch. We love this one by Jennifer Maker.

1. Why Should You Organize Your Vinyl Roll Storage?

It’s important to have all your rolls in one place. This way, you can easily arrange them, access them, and protect them from damage.

I also know that you will most likely have way more adhesive vinyl and HTV vinyl in your craft room than you need. You can also save up some space in your room or office by storing these on the back of the door (shoe holder), under the desk (wrapping paper containers) or on the wall (see racks and vinyl wall holder ideas below).

2. What Dimensions Should I Look for in a Vinyl Rack Holder?

A standard vinyl roll is up to 12” in width and around 48″ in length, though there are wider options you can use for special projects. Always consider the width and diameter of your vinyl rolls that you typically buy when you are looking for a holder.

3. Price

A standard mounted vinyl holder can go up to $15 for a capacity of 20. But the price varies a great deal, depending on the material quality, capacity, and brand. This article will demonstrate why some holders are much more expensive than others.

Top 15 Vinyl Holder and Storage Racks

We scouted the internet and asked other crafters what type of storage they like using to help compile a lovely list of vinyl roll storage ideas of the BEST ways you can store your collection of vinyl. I’m sure one of these will be suitable for your room.

1. ArtBin Vinyl Storage Rack Review

ArtBin’s rack is a budget-friendly wall mount vinyl rack storage option. There are two holes on the top, so you can also place it on your wall. Since its size is just around 16.5“ x 8.6“ x1”, you should always have enough space for it.

To assemble it, simply unfold it and it will lock into position. There are no additional screws or other accessories that you need to use if you want to use it as a standing rack. You’ll need to apply two screws or sturdier nails and easily mount it to the wall.

There’s a space for 12 rolls, with each hole being 2” in diameter. You’ll have a hard time finding a cheaper vinyl roll storage rack that can fit 12 rolls and almost any space.

Pros

• Low price
• Easy to assemble and disassemble
• You can mount it to the wall
• Good utilization of space

Cons

• Looks unimpressive
• Cheap vinyl storage

>>> Click here to grab this cheap vinyl rack storage from Amazon

2. Etsy Craft Vinyl Holder for the Wall Review

Looking for a gorgeous unique vinyl roll wall rack? We absolutely love the elegant look of this rack that is backed onto a beautiful piece of wood.

The board is 37″ long and fits 8 rolls. If you would like to customize the rack, you can message the seller and request to do so – how handy is that!

You can choose to have the backboard in either white, black, ebony, jacobean, true brown or espresso. You also have the option of requesting the wood to be either natural or stained.

Pros

• If you would like a longer board, you can order customization
• Ready-to-hang
• You can pick from a variety of colors to match your space
• You can mount it to the wall
• Good utilization of space

Cons

• Looks beautiful
• Pricey delivery fees

>>> Click here to grab this hand-made roll holder from Etsy

3. Harper Blvd Leal Black Storage Rack Review

If you want a vinyl roll rack with a modern and elegant design, you should take a look at this black vinyl wall rack.

With a size of 27.5“ x 35“ x 46“, you shouldn’t have trouble mounting it to a wall. But if you don’t have enough wall space, you can also use it as a standard rack.

The top pole connects the two sides of the rack that help it stand. You can disconnect it by unscrewing the sides from each other. Then, you can hang the front side to the wall and use it as hanging vinyl storage.

The aesthetics and space-friendly features are a considerable upside, but this rack can only fit up to 8 rolls. So, if you’re looking for higher storage capacity, you may want to skip it.

Pros

• You can hang it on a wall
• Elegant design
• Space-friendly with 27“ wide and 35“ high

Cons

• Small storage space

>>> Click here to grab this rack from Amazon

4. Signworld Vinyl Storage Rack Review

This storage rack has a bigger capacity and uses up a little more space than some other models. It’s 70” high and 33” wide, so you will have to find a proper place for this one. But once you find where to put it, you will have a place for 40 vinyl rolls.

The powder-coated steel material prevents damage and corrosion while keeping the whole product stable. You just slip a roll into one of the arms on the holder, and it will stand. Each one can hold up to 30 lbs. of weight. You won’t need to worry about the rack breaking under the weight of all your rolls.

However, there might be a problem if you want to place smaller rolls on the arms. Most 30” rolls will fit perfectly, but you may have difficulties with other sizes.

Pros

• Holds up to 40 rolls
• Strong and durable construction
• Stands still

Cons

• Might not fit rolls with a small diameter
• Challenging to assemble

>>> Click here to grab this vinyl holder from Amazon

5. The Roll Keeper Craft Vinyl Storage Review

This vinyl roll holder has an interesting, mount-only design. It can hold 25 vinyl rolls in a very tight space. Since it doesn’t have legs, you can only hang it to the wall or door. It is only 6” wide, so it won’t take up a lot of space on your wall.

If you don’t want to spend much money on vinyl storage racks, consider this one, as it is both affordable and has a lot of capacity. You can even get bigger storage from the same manufacturer, holding up to 50 rolls.

Keep in mind that the hanger is not the most durable so don’t stack it with heavy rolls, as it may break.

Pros

• Large capacity
• Takes up very little space
• Convenient to use
• Comes in larger sizes

Cons

• Can’t stand, mount-only
• Not the strongest hanger

>>> Click here to try out this cheap option for storing your rolls

6. Holdin’ Storage Hanging Holder Review

The Holdin’ Storage is another mount-only vinyl roll holder, but this one has space for much more than just rolls. It’s made from a durable, soft fabric with pockets and sleeves for various accessories on each side. At the center of the holder, there’s a strong metal bar that keeps everything in place.

Just hang the 360-degree hook on a pole in your room and you’ll have all your crafting accessories in one place.

You can fit up to 20 rolls inside this storage option. However, the accessibility and organization are not ideal since there are no separate pockets for your rolls. You always have to open the holder and dig through.

On the upside, the outer pockets fit scissors, ribbons, tapes, cards, pens, highlighters, and any other crafting accessories. This storage is quite affordable and it’s one of the more interesting-looking options around.

Pros

• Stores up to 20 rolls
• Pouches for other accessories
• A unique design

Cons

• Sorting and organization are difficult

>>> Click here to grab some of these nifty storage holders

7. Alvin King-Size Mobile Storage Review

This one has 4 built-in wheels that make it your personal storage cart. It has a simple cube-like fence design with four different openings for your rolls. All these openings are 9“ x 14“, so you can sort different rolls in different pockets.

The best part about this storage is its mobility. You can push it around and it will smoothly glide through the room.

But you should know that you need to assemble this product yourself. Since it comes in many different parts and requires some additional tools, it’s not easy to put together. If you don’t consider yourself handy enough, you should probably skip this one.

Pros

• 4 built-in wheels make it mobile
• Big enough pockets for more than just vinyl rolls
• Sturdy steel construction

Cons

• Difficult to set up

>>> Click here to grab these wheeled roll storage trolleys

8. Stanton Wrapping Cart Review

Here is a versatile vinyl roll stand with three drawers. This wooden construction is designed to help you keep gift wrapping supplies organized, but you can also use it for vinyl rolls and other supplies too.

As it is only 20” wide, you can fit it in most spaces you can easily move it around since it has 4 built-in wheels. Drag it from corner to corner until you find a perfect spot.

The top part consists of long poles which act as roll holders, while the drawers are on the bottom part. The rolls also fit into the drawers, but you can use them for accessories and various other things.

The Stanton cart is a reliable, great-looking product with multiple uses. However, it may strain your budget.

Pros

• Wooden, modern furniture design
• Doesn’t use up a lot of space
• Has good capacity
• 3 drawers for storage
• 4 built-in wheels for mobility

Cons

• More expensive than most vinyl holders

>>> Grab this beautiful wrapping trolley for your rolls

9. Signworld Vinyl Storage Rack Review

Signworld racks come in various sizes and this one can fit 20 rolls. Design-wise, it is simply a smaller version of Signworld’s popular 40-rolls rack.

In this case, you get a 26” x 32” x 16” storage rack that you can mount to a wall or any other hanging space. When you unpack the rack, you need to make two holes and put up two screws or hooks. These hanging accessories don’t come with the product.

When you mount it, you’ll get space-saving, 20-roll storage that can hold up to 600 lbs. of weight overall.

As with its larger model, the arms on this Signworld holder are a little too big for some smaller rolls, so depending on your preferred vinyl rolls, you may want to consider a rack with thinner arms or poles.

Pros

• Good utilization of space
• Reasonably cheap
• Strong construction

Cons

• Not suitable for rolls with small diameters

>>> Click here to buy this roll rack on Amazon

10. Signworld BV38 Holder Review

If you are looking for and Amazon vinyl holder, then we highly recommend this high-quality craft vinyl storage rack. The Signworld BV38 is perfect if you’re looking for wider roll holders. It can contain only three rolls on its stainless steel poles, but these rolls can be 42” wide. As it fits a 7” diameter, this holder is perfect for bigger vinyl rolls.

As with most of Signworld’s vinyl roll storage holders, you will need to hang this on a wall. There are two holes that you can mount on two hooks or screws and it should hold well. Each pole is extremely strong and it can hold up to 77 lbs.

Pros

• Perfect for big, heavy rolls
• Fits seamlessly into any environment
• High-quality material

Cons

• Only contains 3 rolls

>>> Click here to buy this roll holder

11. Whitmor Clear Vinyl Wrap Roll Holder Review

The Whitmor organizer is for those who want to save a lot of space and don’t need to organize their vinyl rolls very precisely. It is a very convenient way to keep all your rolls in one place and store them away when you don’t need them.

You can place around 25 rolls inside of this organizer, but keep in mind that the measures are for standard gift wrap. The organizer is 31” long, and it is made from a clear material and has a zippered top.

You can zip up all your rolls in this holder and the impenetrable material will keep them from damage. If you opt for the Whitmor, you won’t have to worry about moisture or any other external conditions. So if you need a super cheap, spacious, and portable organizer, consider this one.

Pros

• Good protection from moisture
• Easy to move around or put away when not needed
• Stores a lot of rolls

Cons

• Hard to organize
• Not for serious crafters

>>> Click here to grab some gift wrap organizers for your vinyl rolls

12. MISSLO Organizer Review

The MISSLO organizer is also a holder that requires a wall or a door to set up. However, unlike other mounted-only storage options, this MISSLO comes with two hooks so you can place it on a door right away — no need to do any additional drilling and assembling.

Since there are six different-sized pouches, you can store not only rolls but also various other things like crafting accessories and items of clothing. The pouches are waterproof, so your rolls and other vulnerable objects will be safe as long as you don’t overload the holder.

The organizer is 59” high, but with only 14.5” wide. So, you’ll have a lot of storage capacity in a small space, and you can even take it traveling.

Pros

• Comes with two hanging hooks, setting up takes minutes
• Waterproof, protective material
• Low price

Cons

• Can’t hold too many heavy items

>>> Click here to purchase one of these shoe holders for your vinyl rolls

13. IRIS Storage Box Review

If you’re looking for a discreet storage box that you can hide away when you don’t need it, consider this one. This plastic box is 33” wide, so it should fit most of the standard rolls.

It gives you a 33”x12” space to fit your rolls. The product comes with a divider and an accessory box. You can place it inside and make a separate section, where you can place scissors or other accessories that you use together with your vinyl rolls.

You can easily put this box under your bed and store it away when you don’t need it. It is also sturdy and big enough to store some other things inside. But if you want to store only rolls, there are cheaper and more easily organized alternatives.

Pros

• A section for accessories
• Easy to put away
• You can use it as a regular storage box

Cons

• The price

>>> Click here to purchase this storage container on Amazon

14. Wallniture Multi-Use Brackets Review

With this wall vinyl holder, you’ll get a modern, minimalistic design to fit in your household interior. Place it directly on the wall, or under a shelf, and it will look appealing as well as being useful.

It comes with two brackets with a set of 6 circles on both sides to hold your rolls, maps, other long objects. The circles are durable, with a diameter of almost 3”. The best thing about them is that you can choose the length of the holder since the two sets come separately.

Despite all the great features, this holder still contains only 6 rolls, and for the price, you can get a better value; however, if you like the design, you won’t regret buying it.

Pros

• Pick the length of the holder yourself
• Durable material
• Looks great in any room or office space

Cons

• Expensive considering the low storage space

>>> Click here to grab this stylish vinyl roll holder

 15. AdirOffice Mobile Storage Review

This is a storage option for professionals. This sophisticated wooden storage can fit up to 20 regular-sized rolls regardless of length. You can easily organize your vinyl rolls and access each one without any trouble.

The storage is made from durable wood and it should last for a long time. There are 4 wheels at the bottom which make this storage easy to move around. There are also two handles, so you can also effortlessly carry it around.

If you’re serious about crafting or if your business involves blueprints, maps, or another type of paper rolls, consider this storage. However, you should know that it is the most expensive one on the list.

Pros

• High-quality wood
• Serious design that fits any interior
• Top-notch organization
• 4 wheels for moving it around

Cons

• Very expensive

>>> Click here to grab this nifty storage cart for your vinyl rolls

16. PACON Classroom Keeper Storage Review

Although it has “Classroom” in its name, this PACON holder is suitable for plenty of other spaces. It’s interesting, colorful design can add life to a sterile environment and the 27.8 x 25.1 dimensions mean you can fit it into any corner and small space.

The best thing about the storage is that you can use a divider to set up the size and the number of slots. For example, you can make 4 big slots or 16 small ones. Thanks to this, you can customize the holder any way that you want.

On the other hand, the cardboard material makes it one of the least durable options on this list. So you get a good looking and spacious holder, but it may be easily damaged by moisture or improper handling.

Pros

• Small and spacious
• Possibility to adjust the size and number of slots with divider
• Simple, colorful design

Cons

• Not very durable

>> Buy some of these boxes from Amazon and give them a try

17. Cricut Vinyl Storage Rack

If you are looking for a DIY vinyl wrap rack that you can whip up with your Cricut cutting machine, then this is the one we love most of all! You can purchase the template for this beautiful vinyl storage holder over at Etsy.

This vinyl craft storage box can fit 16 rolls of vinyl.  The Cricut vinyl roll holder measures 27 x 27 Centimetres. You can create multiple cubes and stack them and lock them in place to keep things sturdy.

They recommend that you also purchase some mount board to cut your template from.

Pros

• You can make it yourself
• It can fit 16 rolls
• It takes up little space

Cons

• Looks elegant
• Stackable

>> Buy the template and cut out your DIY vinyl storage holder now

Verdict on the Best Vinyl Roll Holders/Racks

Before you make up your mind about which vinyl roll holders to grab, remember those questions we asked at the start? How much storage capacity do you need and how often do you plan to use the roll dispenser rack or holder? How much space do you have? Will it need to be on the wall?

Once you know what you want, it will be easy to get the correct vinyl holder. We absolutely love the ArtBin Vinyl Storage Holders, but if portability is your top priority, consider the MISSLO Organizer instead.

Whichever one you opt for, organizing your vinyl rolls will make your work easier and more comfortable, so don’t hesitate and choose a storage option today.

Any other ideas of what to use to store all those vinyl rolls? Please share them with us.

Till next time,

Sam xxx

When you choose to invest a bit of money into craft tools and supplies, you really want to ensure that you are purchasing the newest and latest. Especially when you are purchasing something that focuses on technology.

So what is the newest silhouette machine 2020 has to offer? Here is your answer!

Let’s dive right into our topic for the day, I will also provide you with a super quick summary of the latest Silhouette Machine as well.

What is the Newest Silhouette Machine 2020

Find below info on the latest Silhouette machines, as well as the newest Silhouette products.

What is the Newest Silhouette Cameo machine?

The Silhouette Cameo 4 is Silhouette’s newest craft machine for DIY projects. The Cameo 4 was released on September 2019, and we are expecting to see this machine zoom to the top of the bestselling cutting machines in 2020 list.

This Silhouette cutting machine comes with a range of brilliant features and can cut over 100+ different types of materials. They are currently available in 3 different colors.

You can either buy the stand-alone cutter, or you might wish to save some money by grabbing one of the great value Silhouette Cameo 4 bundles.

This machine is really well priced and offers incredible specs! If you are interested, you can read our full Silhouette Cameo 4 Review here.

CLICK HERE TO GRAB THE FABULOUS CAMEO 4

Newest Silhouette Printer 2020

The only notable release by Silhouette in 2019 was the 3D Printer: 3D Alta Printer. This printer is pretty futuristic! The Silhouette Alta is a 3D desktop printer, so gone are the days of printing on paper, now you can print 3D vases and so much more!!

You can read our review of the Silhouette 3D Alta Printer here.

Click here if you want to check the price of the Alta 3D printer.

New Silhouette Products 2020 

Other Silhouette products that were released this year are:

• 11×17″ Heat Press
• Sheet Feeder (Works with CAMEO 4 and Portrait 2)
• Alta Plus 
• Silhouette Rotary Blade
• High-speed AutoBlade (1 tap) 
•  Punching Tool 
•  Kraft Blade 
•  Kraft Blade (for Portrait 2 and CAMEO 3)
•  Cross Cutter 
•  CAMEO 4 Tool Adapter (to allow for older tools to be used in CAMEO 4) 
• CAMEO 4 Dust Cover – Pink, Black, Blue   
• CAMEO 4 Lite Tote – Pink, Black Blue  
• Printable Glitter Sticker Paper 
• Printable Holographic Sticker Paper 
• Printable Iridescent Sticker Paper 
• Printable Brushed Silver Sticker Paper
• Printable Heat Transfer
• Color Fabric Heat Transfer (Black, White, Red, Blue, Pink)

What’s Coming Soon in 2020?

• 15″ Silhouette CAMEO Plus
• 20″ Silhouette CAMEO Pro

Silhouette Cameo 4: A Quick Summary

Before we jump into a bit of a summary about this best selling cutting machine, here is a quick unboxing video by Silhouette so that you can see this gorgeous new machine in action.

The Silhouette Cameo 4 is the ultimate DIY cutting machine. It is a formidable contender to the Cricut Maker and a great step up from the popular Cameo 3.

The Cameo Silhouette 4 includes all of our favorite features of the Cameo 3 but comes with a whopping increase from 221gr to 5,000gr cutting pressure. It also has loads of other upgrades, you can read more about these in our comparison guide between the Cameo 3 vs Cameo 4.

The Cameo 4 Silhouette has the ability to draw and cut on over 100 different types of material and we love that it can cut material that has a width of up to 12 inches by a crazy 10 feet long. And we love the fact that it has the ability to cut materials without the need for a cutting mat!

We love our Cameo 4 and it is one of the best selling machines from our affiliate links on our website as well.

>>>READ MORE REVIEWS ON THE CAMEO 4 ON SWING DESIGNS HERE

Out of the box, the Silhouette CAMEO® 4 comes with the following:

• Silhouette Cameo 4 – 12″ Wide with Bluetooth
• 1 Year Warranty
• 12″ x 12″ Updated Cutting Mat
• AutoBlade  2 – Single tap reset auto-adjusts blade to match cut job material
• Smart Tool System – Auto Detects Tools and Adjusts Cut Settings
• 4 Tool Adapters – Allows for use of Cameo 3, 2, & 1 Tools
• Ratchet Adjustment Tool
• Dual Motor System
• Built-in Cross Cutter
• Built-In Roll Feeder – Holds up to 150 Foot Rolls
• Online Cameo 4 Instructional Class
• 7 E-Guides by Silhouette School to help get you up and running faster (Link Located within the 200+ Designs Card)
• 1 Month Free Membership to Silhouette U – Receive Exclusive Access to over 250+ Videos, Guides, Tips, Q & A, and much more! (new users only)
• 1 Month Free to Club Silhouette – Latest News, Designs, Discounts
• $25 Dollars in Downloads from Silhouette’s Design Store
• 40% Off Coupon for all Cameo 4 Blades
• 100 Exclusive Designs
• Additional 200+ Bonus Designs – Valued at $300+
• Lifetime Customer Support
• Latest Studio Software for Windows 7 or higher and Mac OS X 10.8.5 and higher

Features of the new Silhouette CAMEO® 4:

• 5kg (5000 g) Downward Force
• Increased Cutting Speed and Acceleration 
• 3MM Higher Clearance
• Ability to use Silhouette Rotary Blade and Silhouette Kraft Blade
• Single tap AutoBlade Functionality
• Larger Tool Carriage Housing
• Gear Driven Tool Carriage
• Touch Panel
• Auto Tool Detection
• Built-in Pull Out Roll Feeder
• Retractable Cover

>>> CLICK HERE TO SEE CURRENT PRICES FOR THE CAMEO 4

We love this machine and truly believe that it is a brilliant buy! It is much cheaper than the Cricut Maker (which is fabulous for fabric but offers very similar capabilities.